My view on products, usually tested too.
Combine that with the most complete protocol analysys I have seen until now, and this might well be the most complete UPM in my collection. Check out the video below if you want to learn more about this WITRN-X-MFi.
➤ No coupon code for this one but it's in promo right now; you'll get 6$ off when you add it to your basket.
➤ Please consider using the link above and show the channel some love.
➤ Join me on Discord : https://discord.gg/fqJEDyy
I made a video on the predecessor of this UPM, the KM001, in which I bitched and moaned about the lack of a decent manual. That was back in April and I had tried to contact the manufacturer for some help with this several times with no reply from them, starting at the beginning of March.
In December the manufacturer had hired someone to take care of all overseas affairs and I was contacted with an apology and an offer to test this new KM001C, which I gladly accepted.
There's still no decent manual however, and my contact over there has already left the company, so this video will serve as kind of a makeshift manual for the time being.
➤ Music by Joakim Karud - http://soundcloud.com/joakimkarud
➤ Haven't found any links that sell the UPM for a decent price, so you'll have to do some sleuthing for a good priced unit.
Let's find out if this powerbank performs up to spec.
Kinda curious about the wireless charging portion of it...
Let’s start off with performance regarding output current : all of the manufacturers’ specifications are met and well exceeded. Charging the powerbank using the Type-c port is over an hour faster than when using the micro-usb port for charging. The output capacity using the USB-A port is about 13% off of what is specified, the output capacity using the Type-C port does a little bit worse at 20% off.
Still acceptable numbers though. And then there’s the wireless charging portion : that’s about 34% off of what is specified. I can’t compare to other data yet, but I suspect there are some/a lot of losses going on with/in wireless charging. Passthrough charging is not advised, but possible. This powerbank can not be used as a sort of UPS, whenever power is (dis)connected the powerbank will reset, interrupting its output.
A big thank you to Blitzwolf for sending me this powerbank!
Thanks for the continued support, guys!
This BlitzWolf BW-WP1 performs well in all of my tests.
I like the addition of wireless charging capability, but it has to be noted that placement of your device is very important for getting the maximum current this powerbank can offer wirelessly. If you need the wireless charging functionality, I ‘d definitely recommend taking a look at this BlitzWolf BW-WP1.
➤ Product link @ BangGood : http://bit.ly/2PWvM2O (referral)
➤ Coupon code '12blitzw' gives you a bit of a discount (probably works on all BlitzWolf stuff at BangGood)
➤ Please consider using the link above and support the channel.
➤ Google sheets doc for comparison : http://bit.ly/drpbcc
I love that they are truly wireless and I like the magnetic system that is used to keep the earphones in the charging case while charging. This is a big improvement over the previous ones which had a tendency to pop out of their charging holes and thus not make contact with the charging pogo pins, leaving you either with an uncharged earbud, or randomly connecting to your phone whenever it lost contact with the charging pins and thus turned on. Not with these, I'm happy to report. Another big improvement is the ease of pairing them with your phone and to each other. That could be a little troublesome with the previous model. About the sound of them I 'm quite happy, they're clear and quite loud if needed and don't show any distortion at volume. The fit in my ears is also excellent, thanks to the extra 'earhook'. One little niggle I have with them is that the entire top is actually a button and sometimes it's a little too sensitive to the touch, pausing playback.
These QCY-T1 Pro's are available for purchase at BangGood.
➤ Product link @ BangGood : https://goo.gl/j3h9zV (referral)
Click it or don't click it, I don't care anymore...
They were very awesome and sent me a review unit free of charge, as long a I'd pay for any duties incurred. It was a generous offer that I gladly accepted, it's a pricey bit of kit!
A couple of weeks later I made this video :
This is a very very nice piece of kit if you need to do some heavy duty USB PD testing; it can handle up to 100W of power, so you can test some quite powerful devices safely. I like the ability to control it from a computer as well as use it standalone. It's a welcome addition to my arsenal of testing gear!
A big thank you to Passmark Software for sending me their USB PD tester for the making of this video.
Thanks for the support!
This charger is available for purchase at Passmark Software.
➤ Product link @ manufacturer's website : http://bit.ly/PMUSBPDT
Please click it and support the channel!
The support is dearly appreciated!